CBSPD Tech Certification Practice Test

These questions are part of the practice quiz. Start practicing

• After manually cleaning contaminated surgical instruments, the NEXT step in the decontamination process is
• What should be done if a BI result is invalid or does not grow?
• What is the role of a chemical integrator in sterilization packaging?
• A positive biological indicator (BI) test shows that sterilization did not achieve the death of all test organisms. Which option best reflects this result?
• Hair coverings are REQUIRED
• Lot control numbers are used to
• Which of the following is the main DISADVANTAGE of using a rigid sterilization container system?
• The Bowie-Dick test is designed to be performed in which sterilizer type?
• Which statement about critical items is accurate?
• Humidity in steam sterilization cycles is considered where applicable.
• Hair coverings are required in all areas of the department to prevent contamination.
• To ensure sterility after damp loads, which action is appropriate?
• How should single-use devices be handled if found in decontamination?
• What is the risk of overloading a steam sterilizer?
• A liver biopsy is performed to check for which disease?
• A steam sterilizer has two pressure gauges. What pressures do they monitor?
• Which solution is generally considered MOST appropriate for high level disinfection of semi-critical devices?
• What best describes the general environmental conditions of the sterile storage area?
• When is residual testing required for sterilization methods like ethylene oxide (EO)?
• When cleaning an intravenous (IV) pump, it is important to use a germicide on the pump surface in order to
• If hair is visible outside the surgical cap during set assembly, what action is appropriate?
• What is the primary difference between disinfection and sterilization?
• The pH of the detergent solution demonstrated to be safest for cleaning surgical instruments is which level?
• Which action demonstrates proper handling of a used tray that must be decontaminated later, during deliveries of sterile supplies?
• Which of the following infections is commonly monitored as an occupational hazard in healthcare workers?
• Loose fitting clothing and jewelry should NOT be worn in sterile processing because it
• What is the purpose of air removal in autoclaves?
• What is hydrogen peroxide gas plasma sterilization best used for?
• In mixed loads, the standard arrangement places metal items
• Which factor does NOT influence the effectiveness of chemical disinfection?
• What is the major reason acrylic nails are not permitted in the sterile processing department?
• The function of the gastrointestinal system is to which?
• Surgical grade instruments, if properly cared for, usually last longer than floor grade instruments because they have
• Nosocomial infections can be prevented by all the following EXCEPT:
• What is the difference between prevacuum and gravity steam sterilization cycles?
• Which statement describes the purpose of dry time?
• What practical drawback is associated with using rigid sterilization containers in routine operation room sterilization workflows?
• Clamps used for hemostasis are designed to achieve which of the following?
• The dynamic air removal cycle is a feature of which sterilization system?
• In the decontamination area, which practice is most effective at preventing cross-contamination?
• What is the purpose of instrument wrap materials?
• What is load verification?
• How often should BI results be documented and reviewed?
• petrolatum gauze sterilization should use which method?
• A tray of instruments has been brought to the decontamination area in a saline solution. Which of the following actions should the technician take?
• If the person maintaining the washer/sterilizer did not remove barrier attire before leaving the area to get more tools, what should the technician do?
• Which indicator is placed inside the pack to verify interior exposure to the cycle?
• Which type of indicator is placed on the exterior of the packaging to indicate exposure to the cycle?
• What is Bowie-Dick testing used for?
• What is the difference between wrap materials and rigid containers in packaging for sterilization?
• If the operating room requests instruments for an emergency ruptured aortic aneurysm, the technician should send
• Which category of medical devices requires sterilization before use due to penetrating the body or contacting sterile tissues?
• Semi-critical items contact mucous membranes and require what level of processing?
• An instrument tray for a laparotomy procedure must include which item?
• Paper-plastic pouches are generally used to package
• What does traceability mean in sterile processing?
• Inspection and verification of adequate cleaning is particularly difficult with instruments that have which feature?
• FIRST action when you see a coworker taking dressing supplies for home use?
• In steam sterilization, containerized packaging systems primarily protect instrument sets from which of the following during handling?
• Hydrogen peroxide gas plasma sterilization is best described as being suitable for which devices?
• Why is instrument tracking important?
• When heat is added to steam without increasing the moisture content, the steam is called
• Which statement best describes the responsibility of load packaging integrity in sterilization?
• Which PPE item is NOT required when manually cleaning devices?
• Which organization sets standards commonly referenced in sterile processing?
• If you forget to punch your time card and you are leaving soon, what action should you take?
• Sterility maintenance covers should be placed on sterile items
• Load verification uses which indicators?
• What does 'dwell time' mean in chemical sterilants?
• If a technician's skin is exposed to liquid ethylene oxide, what should the technician do FIRST?
• Cotton gauze cannot be used in which sterilization process?
• What is the purpose of a final rinse in cleaning or decontamination?
• What should you do with a personal text message received during instrument set assembly?
• When transporting sterile instruments, what is the key principle to prevent contamination?
• Basin sets on the steam sterilizer rack should be oriented to permit condensate to run off. Which description best fits the recommended orientation?
• Healthcare workers are most likely to be infected by which of the following agents?
• Why is it important to follow the equipment manufacturer's instructions during reprocessing?
• What is the primary goal of decontamination procedures in the reprocessing of medical devices?
• When using ethylene oxide (EO) sterilization, what is a critical safety requirement?
• Which area is primarily used for receiving contaminated items from patient care areas?
• Which statement accurately describes patient care equipment in terms of infection control risk?
• A surgical grade instrument set lasts longer because it includes a passivation layer that provides corrosion resistance.
• In sterilization, what are the three basic parameters that must be controlled and documented?
• Patient care equipment is considered what level of infection risk?
• Which item is specifically associated with a laparotomy instrument tray to ensure access to the surgical field?
• Which chemical indicator should only be used in the specific cycle for which they are labeled?
• Generally, the first step in loosening blood soils from the channels of an instrument is to soak it in
• What is the difference between chemical indicators and biological indicators?
• When there is an emergency admission and equipment is needed, what is the most appropriate course of action?
• In which distribution system are requisitions filled and delivered as they are received?
• What are OSHA obligations relevant to sterile processing?
• How should sterile packaged items be transported by hand?
• What is the primary reason items should be cooled on a sterilizer cart before storage?
• "Clean to dirty" is a sterile processing department term used to describe
• How should damp loads be handled after sterilization?
• What is the role of quality control in sterilization?
• Every healthcare facility has an organizational structure, or chart, that outlines
• Which factor is described as the most important in preventing contamination of sterile packages?
• What is instrument passivation and why is it done?
• For QA and patient safety, which process is essential in sterile processing?
• Instrument passivation is primarily designed to:
• A positive BI result indicates what about the sterilization process?
• Which statement best describes sterility maintenance covers usage?
• Name two primary categories of indicators used in sterilization validation.
• The chemical disinfectant that leaves a residual film is
• For linen packs in a steam sterilizer, the recommended orientation is to place them
• How does a chemical vapor sterilizer operate?
• What is the best procedure when you are delivering sterile supplies and asked to take an opened/used tray to decontamination?
• What is the recommended step after removing contaminated trays from a cart before reloading with clean trays?
• What is load integrity?
• In an emergency situation where a used IV pump is urgently needed, what is the ethically correct action?
• Failure to completely dry devices before processing in low-temperature gas plasma can result in which outcome?
• Why is instrument count verification important after processing?
• Which of the following is NOT classified as a critical medical device?
• Which of the following is necessary to attain the high temperature needed in a steam sterilizer?
• Name three types of chemical indicators used in sterilization packaging.
• Which combination of indicators is used for load verification?
• To kill the remaining microoragnisms on surgical instruments, the MOST cost-effective sterilization method is generally considered to be
• Heat sensing thermometers in steam sterilizers are located in the
• Which sequence best describes the traffic workflow in areas where medical devices are processed?
• Which sterilization method uses saturated steam under pressure and is most common for wrapped instruments?
• Which statement best describes a 'flash' or immediately usable sterilization cycle?
• All of the following agencies regulate ethylene oxide as a sterilant EXCEPT
• A broken glass suction bottle is returned to Decontamination. What should the technician do?
• When preparing a set of instruments for processing in a washer/decontaminator, how should the instruments be positioned inside the basket?
• The most important factor in preventing bacteria from contaminating sterile packages is
• After BI results are documented, what action is required if the results indicate a problem?
• Which data is essential to record for every sterilization load to support traceability?
• Which additional indicators function as supporting indicators along with chemical and biological indicators?
• Containerized packaging systems are most commonly used to protect which during steam sterilization?
• In the standard workflow, which area comes immediately after Assembly?
• Heat sensing thermometers for steam sterilizers are located in the
• What is load configuration in sterilization?
• What is the purpose of a Bowie-Dick test?
• The MOST commonly recognized halogen is
• In sterilization records, what does a lot control number primarily enable?
• Which statement is true regarding periodic maintenance on sterilizers?
• What is the primary method for reducing microbial load on reprocessed devices to enable sterilization?
• What is instrument set assembly?
• You receive a cell phone text message while assembling instrument sets. Which action is BEST to take?
• In load processing, what is the function of a biological indicator envelope?
• What is the recommended practice regarding reprocessing single-use devices?
• Which statement best describes a reusable barrier system in packaging?
• Safety Data Sheets (SDS) provide health and safety hazard and risk information on which of the following?
• The effectiveness of any chemical disinfection process depends on all of the following EXCEPT which?
• When working the decontamination area, transmission of pathogenic organisms from used surgical instruments can BEST be minimized by
• What is the purpose of rotating stock using FIFO in sterile storage?
• Which area is used for assembling instrument sets after decontamination?
• Which items are considered 'critical' in sterile processing?
• Why are outside shipping cartons often restricted from entering the sterile processing area?
• Where should lot control numbers be placed?
• When using the sequential wrapping method
• Which description BEST describes the manual cleaning process of surgical instruments?
• In a sterile processing program, high-level disinfection for semi-critical items is aimed at what outcome?
• The sequential wrapping method involves using how many wrappers in sequence?
• Coronary artery bypass surgery may be performed on patients with which condition?
• What is wrap compatibility?
• Simultaneous wrapping means to wrap an instrument set with which configuration?
• What is the primary purpose of a biological indicator in sterilization processes?
• Which condition is most characteristic of the sterile storage area's environment?
• Which statement about low-temperature gas plasma processing is true regarding drying?
• Which item is least essential for traceability documentation?
• If you forget to punch your time card, what is the appropriate reporting action?
• To whom should you report a barrier attire breach in the decontamination area?
• Which statement best describes sterile storage best practices?
• When is gravity displacement steam sterilization preferred over prevacuum?
• Chemical indicators should be used in the cycle for which they are labeled to ensure which of the following?
• Which item is an example of a noncritical medical device?
• Outside shipping cartons should not be brought into sterile processing area because they are often
• What is the correct action when you observe dressing supplies being used for personal purposes?
• The growth of pathogenic bacteria in living tissue is called:
• What is meant by "dry time" in a sterilization cycle?
• Which area is used for storing sterile items after they have been sterilized?
• When a steam sterilizer is loaded with linen packs, they should be
• What are the major physical areas of a typical Sterile Processing Department?
• Which statement distinguishes critical from semi-critical items in instrument processing?
• Which statement best describes gravity steam sterilization's effectiveness for complex loads?
• What is the best method to reprocess patient care equipment?
• Which of the following sterilization methods would be appropriate for petrolatum gauze
• When a staff member brings contaminated trays to the Sterile Processing Department in a cart and requests replacement trays on the same cart, the technician should:
• The purpose of the dynamic air removal cycle of a pre-vacuum steam sterilizer is to
• An infection acquired due to an improperly sterilized surgical instrument is best categorized as which type of infection?
• When a steam sterilizer load contains a mixture of fabric and metal items, the items should be placed
• A spore test result showing growth indicates that the sterilization cycle did not achieve sterility.
• Which statement about quality control in sterilization is most accurate?
• What is the primary purpose of soaking instruments in an enzymatic detergent before cleaning?
• Which agency would approve the disinfectants used on floors and walls in the Sterile Processing Department?
• What is the purpose of a biological indicator envelope in load processing?
• What is the typical validated parameter set for a gravity displacement steam sterilization cycle?
• For high-level disinfection of semi-critical devices, which concentration is commonly used?
• What is a 'flash' or immediately usable sterilization cycle?
• What is a spore test used for?
• During an emergent ruptured aneurysm scenario, which category of instruments is prioritized for preparation?